3D Printing
- Thread starter Aaron
- Start date
Channel98
Don't yell or hit.
I used my flip-phone to call a friend who has a Radio Shack TRS-80 computer and NetZero internet service. I asked him to find that video and fax me the link. He was unable to find it but he discovered this 2019 video of a young man wearing a Jurassic Park shirt and demonstrating the 3D printer he bought in 2012:
Channel98
Don't yell or hit.
Think of all the money they'll save on fuel costs if they can find a way to make 3D-printed gasoline.
Father and son building 3D-printed Lamborghini in Colorado - CNN Video
Father and son building 3D-printed Lamborghini in Colorado - CNN Video
scotchandcigar
All I wanted was some steak
All-righty then.
HecticArt
Administrator
That's one expensive model car.
I was able to print a couple of copies of a building I designed for athletics. They are working with a donor to try to get it funded.
The printers that we have only print objects up to 5" x 5" x 5", so they aren't very awe inspiring, but it's still cool to do them.
I was able to print a couple of copies of a building I designed for athletics. They are working with a donor to try to get it funded.
The printers that we have only print objects up to 5" x 5" x 5", so they aren't very awe inspiring, but it's still cool to do them.
Wolf
AI is here, time to obey our robot overlords!
I thought there was an old 3D Printer thread. I did some research on a basic entry level 3D printer and couple years, I did bought one an Creality Ender 3 from Amazon. I didn't get to use it much and plus I was having issues with the PLA filament heating on the table and it was coastally uneven. I simply sold it and now I want to get into it again. I still want a good entry level 3D without the table issues. Aaron or somebody recommends any?
I basically want to create small objects that is basically can be as tall a few inches.
I basically want to create small objects that is basically can be as tall a few inches.
scotchandcigar
All I wanted was some steak
I just want to say, you might have set a record for longest time to react to a post.
IdRatherBeSkiing
Sherbert is NOT and NEVER WILL BE ice cream.
Maybe at some point he will catch up to the posts that talk about how sherbet isn't ice cream.
Wolf
AI is here, time to obey our robot overlords!
scotchandcigar
All I wanted was some steak
I think it was better when we didn't know his name.I want to argue with Doug about ice cream!
IdRatherBeSkiing
Sherbert is NOT and NEVER WILL BE ice cream.
Like that stupid horse.
sadchild
Dude
That's the one my son has. It's his first 3D printer. He's had it for a couple years now. He's printed dozens of things. He's made some money printing stuff for the place I work and for someone who works here.
Wolf
AI is here, time to obey our robot overlords!
You all know and I been posting in the Wolf's Den, this is my Ender 3 V2.
We do have 3D Printing thread, last week I printed these a wolf, cat, x y z calibration cube, half body of a moose and tug boat which the roof came apart.
When the roof of the tug boat came apart and the head of the moose were all loose filament strings. I didn't realize it needed supports. Last night, I finally learned how to work with them. This is the outcome of the moose head now. It still has some lose web and stringy filaments. Once I get better all that should go away. Plus my partner niece likes moose's and I surprised her with it and she actually loves it. Now I plan I scaling these up and print bigger objects soon. Plus I have over like 20 filaments colors now. My partner wants me to print Easter eggs with all the various colors I have.
We do have 3D Printing thread, last week I printed these a wolf, cat, x y z calibration cube, half body of a moose and tug boat which the roof came apart.
When the roof of the tug boat came apart and the head of the moose were all loose filament strings. I didn't realize it needed supports. Last night, I finally learned how to work with them. This is the outcome of the moose head now. It still has some lose web and stringy filaments. Once I get better all that should go away. Plus my partner niece likes moose's and I surprised her with it and she actually loves it. Now I plan I scaling these up and print bigger objects soon. Plus I have over like 20 filaments colors now. My partner wants me to print Easter eggs with all the various colors I have.
IdRatherBeSkiing
Sherbert is NOT and NEVER WILL BE ice cream.
Have you printed yourself a new house yet?